In recent years, drone jammers have continued to develop in the direction of high-power output, mainly because the current drone technology is advancing by leaps and bounds, and the effective distance and anti-jamming ability of flight control and image transmission have been improved compared to the past. a lot. As a manufacturer of drone jammers, the quickest and most effective way to form an effective confrontation with them is to increase the transmission power of jamming signals. Then the question arises: what is the appropriate transmission power for a high-power drone jammer?
Looking back five or six years ago, or even earlier, the transmission power of drone jammers at that time was generally not large, and the transmission power of each signal jamming module only needed 5W-10W, and only so much was needed at that time with a higher power, you can get a very good jamming effect against drones. However, with the advent of more and more commercial drones, in the actual testing and use process, it has been found that if the original transmission power is still used, the interference distance will obviously be greatly reduced. Therefore, as a manufacturer, we began to increase the transmission power of each module, and increased the output power of the interference signal of each module from 5-10W to about 20W.
However, today, as drone manufacturers adopt more and more frequency hopping communication technologies, and at the same time expand several other communication frequency bands, and also develop newer anti-jamming algorithms and anti-jamming countermeasures ability, if the drone jammer’s module transmission power continues to use the output power of 20W, it will be found that the effective interference distance has become very short when facing those new drone s with new technology capabilities. What should I do? Further increase the output power of the module, and continue to increase the power of 20W to the level of 50W.
The transmission power of the current high-power drone jammers is generally at the level of 50W, which is the preferred solution for various manufacturers. Of course, in addition to this method, there are other methods that can improve the jamming effect without increasing the power. methods, which we will continue to answer later.
